Boiled wool jacket, finished!

I'm done!

And just in time too, what with the snow we had last night. Yikes. Those are baby pumpkins under the snow on the lower right. It was really windy too and the snow stuck to the door. This shot was taken just as I was leaving for work at about 7:45 am.

To go back to where I left off, here is how I sewed the buttons to the sleeve tab detail. I sewed them to the tab and the sleeve, through all layers, before I sewed the lining hem up on the sleeve. That way, I could push the needle in straight through all the layers of thick wool fabric and not catch the lining, nor worry about trying to angle the needle in vain.

Here are the sleeves, from different perspectives, all finished.

The pattern instructions called for a maximum of three buttons down on the short sleeved jackets (and only 2 down on the long sleeved version). They also called for a button to be sewed on the inside with a corresponding buttonhole on the inside of the flap. I decided to make four buttons down (making 8 to sew on for the double breasted effect) and not do the inside buttonhole. If it turns out that I need it, I will sew a large snap on the inside part of the flap.

I decided to make the four buttonholes (it is only a faux double breasted) the old fashioned way, which is to say I knew where they were going and put pins in but I free-handed the zigzag stitching to make the buttonhole. The stitching was therefore a tad wobbly (this is actually the best of a bad bunch) but now that I have worn it, you really don't notice at all.

Here I am modelling it the night before, as the snow has started to fly.

Here you can see a hint of the dotted lining - so cute!

It was a pleasure to wear and really warm too! I am so pleased that I am going to get a lot of wear out of this jacket. It turns out I can fit a shirt and suit jacket under it but not the five layers for when it is 20 below. But when it is that cold, I will want something that covers my bum anyway. What next?

Boiled wool jacket, almost done

Almost done! I got some buttons on Thursday:

I looked at all kinds of red buttons, plain, patterned, matte, glossy. I looked at black buttons too and even metal ones but I liked these red buttons the best. They are not very contrasty and yet they stand out a little bit. I think I am going to have to do the buttonholes the old way, because the fabric is so thick my automatic buttonholer won't work on it.

I've sewed the inside and outside together and pressed all around the edges. I have sewed up the jacket hem but not the lining - that is the lining hanging down below the hem there which of course, it won't do after I've sewed it up.

I haven't hemmed the sleeves yet either. I think I'll wait to the end for that, as I want to make sure they are fairly long, to cover the cuffs of whatever I will wear underneath the jacket. It is heavy too! For such a short garment, it weighs a lot. That is partly the kind of fabric and partly the volume of the jacket with the pleats at the back. Next, more hemming, topstitching all around and buttonholes.

Red, boiled wool jacket

It's funny how, even after 30 years of sewing and many of those years realizing that sleeves aren't so hard, I still put off making sleeves because they used to be difficult.

With a fully lined jacket, there are FOUR sleeves! And these are slightly different, in that they have a pleat at the top and a clip on the sides. Halfway between the top of the shoulder and the notch, there is a spot where you sew a retaining line of stitching and then you clip in almost 5/8 of an inch to the small dot. When you split the fabric at the clip, it makes for a square spot on the outside on the finished sleeve.

I haven't pressed this sleeve, nor have I unpicked the basting for the pleat, but you can see where the seam goes square on the front there.

Here's what the back looks like, before the sleeves were put on. So cute with the pleats! And you can see I have marked with white thread, the small dots on the sleeve seam allowance, where they will be clipped for that square spot.

I decided to use the wool yoke in the back for warmth but I also put the lining fabric over it, for a uniform inside, non-stick finish, as well as additional warmth.

Here's the lining all put together. There is no extra band on the inside, like there is on the finished back outside. Now I "just" have to put the outside and the lining together!

Red, boiled wool jacket

Everything is cut out, the interfacing applied and I have started to assemble the jacket.

Here's the lining. It's polyester (most lining is that or acetate) and substantial so I think it will serve as a bit of a wind break. You won't see it unless I flash the inside of the coat but it's fun to know it's there.

The jacket will be fully lined - sleeves, body, pockets.

I am trying to decide how to make the back yoke. The pattern instructions call for the inner layer of the yoke to be the same fabric as the coat, so I have cut out two wool yokes. I also cut out one lining yoke on speculation. I think it will act as a wind break, sandwiched between the two wool yokes (which are more porous than the polyester lining). My conundrum is whether to put the lining on the inside layer instead, so the entire inside of the jacket is lining. Will the wool yoke drag on a sweater worn beneath the jacket? Why would the pattern makers call for the yoke to be made of wool on the inside, except for warmth? Will I screw up if I put the lining on the inside?
If no one has ever done this and I don't get any answers to my conundrum, if in doubt, I will do it the way the pattern says.

Here is my assembly line for some of the small pieces. I have made the "welt" pocket flaps and they are ready to be topstitched. The things on the machine are the sleeve tabs which then need to be turned right-side-out. I parked the red thread there because I have fifteen shades of red and I am using up some brighter stuff first, before I start the shade I bought for this fabric. And that's a good reproduction of the way this red looks - nice and red, tomato red. Not the pink-red you see in some pix.

Here's the welt for the pocket sewn on and there are two pieces of pocket lining that I have sewn on and tucked behind it. The slash pocket is right in the front dart - interesting.

Here are all the layers for the back at the yoke. There is the back, its deep pleat, the band (folded in two) and the yoke. Six layers in two places.

Here's the back from the outside, before it is pressed. Too pink by half. Onward!

Red wool coat

How did it get to be the last day of September?

One thing I don't often mention is the prep work for starting a project. I have never used this pattern before so I like to read the instructions first. Then I have to cut apart all the pattern pieces and see which ones I need to use. I double-check them with the list shown above.

The only garment in this pattern is the coat (some have all sorts of things like pants and skirts and things) but there are some variations. I'll be using all the big pattern pieces but maybe not all of the small ones. Once I have the pieces separated, I iron them flat.

I am going to make the long sleeves with 6 buttons on the front (view C) but I want to make the slash/welt pockets (views A and B), not the patch pockets. I also like the detail of the band around the sleeve but it is only on the short sleeve and the 3/4 sleeve.

When you look at the instructions for the sleeve band, you see it is only decorative and not functional. Interestingly, it is made from three pieces of fabric so that the seaming becomes part of the decorative design. I have been debating with myself if I want to use the print lining I got for the backing of the sleeve bands and I haven't finished that debate yet. I lean toward NOT doing it, just because I am not familiar with this pattern and there may be a good reason not to use lining fabric to back the band.

I have got enough fabric that I could make them both ways and see which looked better. You can see that the band gets sewn to the sleeve and the button is just for show. But I like the way it looks on the photo and in the drawings so I think I will make bands and then decide as I go along, whether I will attach them to the sleeve. They get sewn into a seam but I could still pick them out later if I don't like them.

Here I have laid out all the pieces and pinned them, except for the bands. I am going to use Mum's old electric scissors to cut this coat out. I keep forgetting I have electric scissors and while I may not use them for delicate stuff, they should be perfect for this sort of wool.

Finishing things up and a new jacket

I am making progress! I have made a pot of blueberry tea to have while I blog. Then I have to study some for this test I am taking on Monday. It may lead to a job as an adjudicator at a tribunal so keep your fingers crossed. Then I will finally have somewhere other than school whence I can wear all my fancy duds! (Hmm, that doesn't look right but my understanding is that "whence" means "to where" so it should be correct.) I'll alternate between studying and sewing to keep fresh at both.

First I took a photo of the two tops I finished. I haven't worn them yet but I have worn the cream silk one I made three times now! It works beautifully under a suit jacket and I can get warm at the front of the class without dying from dehydration.

I finally sewed a buttonhole on that checked jacket and finished it with the large, slightly sparkly gold button that won the contest. There is a sparkly gold thread that runs through the brown stripes in the check and I think the button goes well with the whole thing. Not having worn this yet, I will reserve judgment on the total effect.

I finished the wool skirt. As usual, I converted darts to ease - those are the wrinkles you see pinned into the skirt as it is attached to the facing. I also basted the lining to the skirt around the top before sewing it all to the facing. That's that line of stitching you see showing on the lining.

Because this is such nice fabric and I want the skirt to look polished, I sewed seam binding to the raw edge of the hem and hand sewed the hem up. The lining hem has not been sewed yet - that's the raw pinked edge you see.

Because the skirt is surprisingly heavy, I sewed hangar tabs to the facing. It makes the skirt hang like this and I have to iron it the morning I want to wear it, to get those drape marks out.

But if I hang it with clothespins like this, it falls off the hangar after a while.

In the meantime, I have been thinking about my old LL Bean barn jacket. I have had this great coat for over 15 years now and I used to wash it whenever the dog put her muddy paws on it so it got washed often. Now it has frayed around the pockets (which are lined at the edge with dark green corduroy),

and it has frayed on the sleeves where I used to turn up the cuffs, which are also lined at the bottom edge with the corduroy. I still think I can get some wear out of it so I am wondering if I should get some gimp or other braid and sew it over the broken bits?

That said, my next project is a new, cool weather jacket. I thought this pattern was so cute, but of course, I cannot imagine making a jacket that you wear outside in anything other than full length sleeves! Maybe someone meant for this jacket to be worn walking around the mall but if I was inside, it would be too hot and when I am outside, I want proper sleeves. So I am going to make it in the full sleeve but with the slash pocket of the other views (A and B). I have not decided on the buttons but I think I will be going for 6 of them, not 4, for better control in the wind. It is certainly not a jacket I would wear when it's minus 10C but I think with the right layers and accessories, I could wear it to minus 5C. I'll let you know later.

When you wear some kind of outer garment 9 months of the year, you want a selection and you want one of them to be red. I have some "boiled wool" in a nice bright red here, although I think it is mixed with some nylon. For a change, I didn't pre-wash it and so once a year, I will have to dry clean this. I think I was afraid the fabric would shrivel into weirdness so I decided to go for dry cleaning later. I also got some "fashion polyester" for the lining. Instead of getting "regular" lining, I saw this fun polka dot stuff on sale and thought it would be cute whenever I took the jacket off. I have not made this pattern before so I suppose I am risking a bit here but it is a coat and so it won't be fitted too closely and I think I can get away with not making a muslin - which I never make anyway. If it doesn't work for me, some lucky Sally Ann client will get a unique jacket!

Silk tops and wool skirt

Ten days since my last post. Hmm. I've been busy! But I haven't even finished those tops. So back to where I left off...

That silk I bought on sale was so narrow (how narrow was it?) that I had to cheat to get the tops cut out. I had only bought a metre of each colour, thinking that was enough. As you can see in this layout photo, there was no way I could get both the front and the back cut out on a fold. I thought I could fold each selvage into the middle and do it that way but it was just too narrow.

Even though I put the back seam right on the selvages, the sides overlapped by a few millimetres and I had to make them with a 3/8 seam allowance. Talk about cutting it close.

Here is the blue top, inside out, with the back up. You can see I didn't need to finish the centre back seam because the selvages are already finished. I zigzagged the other seams and trimmed them, although they are not trimmed yet in this photo.

Here I am, ironing the neck facing on the ham. It really is easier on something like a neckline or shoulder, to use the ham, instead of trying to iron it on a flat board. In this photo, I have already understitched the facing and all I need to do now, is iron it folded under.

Here's the ham from another angle. After this, I stitched the facing down to the shoulder seam by machine stitching in the ditch of the shoulder seam from the outside of the garment.

That was the end of the machine sewing. From here, to finish the tops, I have to hand stitch the hems. They are pinned up and ready to go. I generally save my hand sewing for sitting in front of the tv. These tops look awfully shiny and that pink one is very pink, but when I wear them, it will only be under jackets so all you will see is a little bit of the top at the neck.

Because I only have hand sewing left, I am not breaking My Rule by starting a new project upstairs in my sewing room! This is the beautiful wool I got at Darrell's sale. He only had the oatmeal colour left at the sale and I kicked myself when I discovered he had had two other colours - blue and green - as they would have made perfect, all-purpose serviceable skirts. Oh well.

I am making my tried and true, no-waistband, knee-length skirt with a small vent in the back. It will go with everything this Winter!

Votes are in!

I got 16 votes, including one on Flickr. I thank you all for spending the time to look at these things! My husband says that the pictures don't really show how the buttons look but they are the best I can do. If I count his vote, I have 17 in total.

I got 5 for the small gold spiral. I got 3 for the brown plastic one. And I got 8 for the large gold one. I was leaning toward the large gold one all along, and in fact, when I was thinking buttons, before I even pulled them out of my stash, I thought of it as an option. I was concerned that it would be too sparkly and when I looked at the three finalists over and over, I started leaning toward the smaller gold spiral. It blends right into the jacket fabric, which is both good and bad, depending on the look you want to achieve. I also had a vote for doing the snap and no buttonhole thing but it is a little fiddly to be doing and undoing snaps and I am not a fan of fiddly. Form should follow function!

I am therefore going to make a large buttonhole, the size of the big gold one and sew on the big gold button. Then, if I have doubts or get weird looks, I can hand stitch the end of the buttonhole closed and take off the large button and go for a smaller one. How's that?

In the meantime, I have started back to work and am scrambling to finish the little silk tops for under jackets. I wore the embroidered linen to my first classes yesterday and felt very cute. :) But no one commented on it. :( I wore the cream silk top too. It was a hot day and although the college is sort of air conditioned, because I was not told my first class was in a different room, I had to sprint around the campus and was sweating freely by the time I found my proper classroom. I was glad I had on light and natural fabrics! Tomorrow is also supposed to be hot so I am thinking I will wear one of the new silk tops under a light cotton jacket with the shorter, "extra" navy linen skirt (that I got out of the left-over linen). We'll see.

Buttons

Votes are split between the shiny brown plastic button and the larger shiny gold button. I myself am still leaning toward the smaller, duller gold button. I need more votes! Four does not a survey make.

Here they are again, pinned on to the neck of the jackette.
First the shiny brown.

Next, the large gold.

Then the smaller gold.
I suppose I could make the largest size of buttonhole and then switch out the buttons from time to time. More votes!

Speaking of buttons, I finally got some for the embroidered linen. It was a tough contest at the store, with Darrell and Carmen going their ways and me going mine. Carmen didn't care for my final choice (too sparkly) but Darrell picked it out as a possibility so I guess he's okay with it.

I settled on making the stripes in the "shell" go horizontal and the metallic stripe goes up toward my right shoulder, instead of the way it is in the previous close-up. The buttons are a little oddly paced in this pic because I had just pinned them on. Now I have sewed them on but I was too lazy to put the finished jacket back on Rose.

While I am prewashing some oatmeal coloured wool for a skirt, I am going to quickly sew up another top in some silk charmeuse. I love silk next to my skin and have decided to have a few tops to be worn under a jacket. Since it is so small, and since I have modified the pattern, it only takes one meter to make, as long as the fabric is at least 112 cm wide. It's a squeaker!