Matching purses

At last! I can allow myself to think about something ELSE.
I spent all day Sunday (off and on) sewing up the two matching purses. So cute!

It is almost like making baby clothes, because they are so small. But there is still a fair bit of construction. I used Butterick 6371, the middle silver purse on the right.

It calls for buckram on the bottom oval piece but I used two layers of the hair canvas (because I had it) on both the lining and the purse oval pieces. So there are six layers on the bottom, which is still one less than in the bodice of that dress!

I cleverly discovered that my pressing ham is the perfect size and shap for pressing out the side seams on the purse.

The bottom looks complicated with all the pleats and easing the sides onto the oval, but it is surprisingly easy.

There is a layer of quilt batting between the outside and the lining but it is just held in around the edges or the seams - there is no actual quilting going on.

Once you have the inside and outside done and the handles attached to the outside, you put the lining inside and sew it around the top edge.

The oval piece on the lining is supposed to be made out of lining fabric but I used the outside fabric for a fun, finishing touch.

And there they are!

More little bags

Call me crazy but I'm making more bags. I had such fun making the last set that I decided to use up the rest of the upholstery type fabric and I got another two sets of bags out of it.

I ran out of the pale green rayon for the lining so I am using some craft fabric I bought ages ago for the second set.

I also had to make more bias tape for the larger bag. For a complete tutorial on how to make a batch of bias tape, go here, from March 8, 2008.

Now I have just enough bias tape in both fabrics to make a large bag with each kind of lining.

Here are all the pieces, waiting for me to get zippers for them. For the sharp-eyed, there is a bonus fifth bag in there. I just can't throw away even a small piece of fabric if it can possibly be turned into a bag. Tomorrow, I'll be getting the zippers. I was going to walk - it is "only" a 10 km round trip - but I am getting a ride instead by a fortuitous set of circumstances.

Some little bags

Happy New Year!

When I went up to my sewing room, I played around with some fabrics and patterns and put some things away and then thought, I'd like to make a couple of little bags to give away.

At Christmas when she was here, Mum admired the bag I made as a pencil case for work so when I discovered I had a fair bit left of that upholstery fabric, I thought I would make one for her.

I got out my trusty bag pattern (Simplicity 9949) and examined what bits of fabric I had.

I had enough of the upholstery fabric for four bags and found some rayon that I had made a shirt out of that would be suitable for lining.

I also used the rayon to make seam binding.

It was a good plan when I put the seam binding on the one larger bag. I pinned one side over the stitching line and then sewed from the other, unpinned side.

The idea was that because I had pinned it on the underside, I would catch that side of the seam binding when I sewed it from the other side. It worked all around the zipper but not on the ends so I had to sew it twice - the second time from the pinned side that had not caught in the first stitching.

Consequently, the seam binding is a little rippley but it'll never come off!

I'll put the smaller "pencil case" bag inside the larger one when I give it.

And here's what they look like separately. That larger bag can hold a surprising amount of stuff. I just find it fun to make these things and then give them away. Mum will get one set and I think I know who will get the second set.

My third chemo is tomorrow so I may feel a little too crappy to sew for a few days, if it's like last time. I'm hoping it won't be but I am prepared to spend the rest of the day in bed.

Jacket's done and some other stuff

First of all, let me say thank you for your kind comments. And all of them positive, as I had asked for! That whole energy thing is a force to be reckoned with.

Now, back to the jacket. This is the cuff. I have sewed it to the wrong side of the sleeve, sewed the ends together and turned them and now I have pinned the folded and trimmed edge to the outside. If you make the photo large and look closely, you can see the line of stitching that attaches the cuff. The folded edge will just cover that line and the cuff itself will be sewed to the sleeve with topstitching.

Here I am, sewing the cuff to the sleeve with a line of topstitching.

Once I had finished ALL the topstitching (each line has a duplicate, parallel line so there are two rows everywhere), it was time to attach the snaps. I just use the kit snaps and they come with two tools. You cut a tiny hole in the fabric with this one tool, by hammering it through the fabric and then you put the snap pieces in place and hammer them together using the other tool to crimp the pieces of metal together.

It works pretty well until the hammer slips off the tiny tool and smashes you in the thumb. Not a crisis (although it does really hurt) but when you have chemo, the chemicals break down your blood cells too and you can bleed pretty badly, so I iced this as soon as I had smashed it.

Once I got back upstairs, I realized I could hold the tiny tool with a pair of pliers and couldn't believe I had not thought of it before. It was a slap myself in the head, duh kind of moment.

And here it is! I am all decked out with Christmas colour accessories because Christmas is tomorrow. I bought some large scarves for my now bald head but I find I am most comfortable in this little knit cap I got from the MEC for bike camping, or all the old scarves I bought for my beloved dog when she was alive. Wearing her scarves is a sort of homage to her too.

And then I had some time to make a couple of gift bags that can also be used as shoe bags. When you live in snow country, you wear boots everywhere but bring your shoes when you visit peoples' homes and shoe bags are always welcome.

I had two pieces of some upholstery fabric that were just big enough for women's shoe bags. The only thing I miscalculated was the size of the pocket for the draw string. If in doubt, leave more room.

I was using this fairly fine, nylon cord I had so I thought I didn't need much room. And it does move through the sleeve well enough.

But the fabric is so thick that it doesn't bunch up much and it would have been better to have a slightly larger casing. However, I am not willing to re-do it now. Anyway, if it's just for shoes, it doesn't need to be tight at the top.

I wish everyone a Merry Christmas for tomorrow.

Handlebar bag finished

And we're ready to rock and roll. I got a length of soft braid (they had shinier stuff but mine seems to be made of something cottony) to act as the shoulder strap.

I had to figure out how to insert it between the zippered top and the body of the bag so that it would end up on the outside where it belonged but that wasn't too difficult. Here I've pinned the zippered top to the bag and the shoulder strap is inside the bag about 2 inches so I can sew it down for extra strength.

The handlebar itself is packed so I used a lamp to simulate the bar. It doesn't show very well here but my plan is to loop the whole strap over the handlebar and then snap the loops onto the bar as well, creating a redundancy. This bag will contain all the little things we want to keep handy while riding (like the camera and money) so I don't want it to fall off.

I figured that I could use an 8 inch loop over the handlebar on each side so that's where I placed the hammer-on snaps. Here is the bag hanging up, with the loops snapped shut. I'm pretty pleased with it even if I won't get to test it in action until we get to Halifax. I've put a few notes on the photo if you want to go see them at Flickr - nothing exciting.

bike bag redesign

Well I am cleverer than I look because the bike bag worked with the measurements I gave it! It only connected with my knees when I was pedalling into the wind or when we hit a really big bump. We biked about 30 kms with it and I loaded stuff into it and was pleased with it. I think I'll use it again on treks to the market or elsewhere.

As I did on Sunday! Here I am in one of my rayon bike shirts. You can just see part of the bag behind my right hip. More importantly, there are horses in the background!

Here's Peter in one of my shirts, and you can see the bag hanging from the stoker's handlebar. In spite of its success, I had decided to redesign it anyway, especially as the zipper was not easy to operate one-handedly.

So I am basing the bag on the tote bag pattern I have used many times (especially for gifts). I am using the smaller of the sizes and modifying it a fair bit. I wanted an exterior pocket that was easily accessible so I could whip out the camera at a moment's notice while pedalling. I decided to make a gusseted pocket to accommodate the bulk of the camera and prevent the bag itself from being distorted when the camera was in the pocket. Of course, I couldn't make a pocket on only one side so I did a matching one for the other side of the main bag. In this photo, on the right-hand side, I have stuffed a kerchief into the pocket before the bottom has been sewn down. On the left, I have sewn the bottom of the pocket down.

After I tested the pocket, I realized that the camera would not be totally secure and decided to close it with some velcro. I tried closing the pocket top with the velcro attached directly to the inner edge of the pocket but the top of the pocket buckled too much. So I sewed the bit of Velcro to a bit of a tab and then I could secure the open edge of the pocket to keep the camera from falling out (if the bag tipped badly) but still have easy access to it.

Here is a finished pocket, stuffed with the handkerchief. Then I applied two interior flat pockets and sewed the sides of the bag together.

Here is the bag before I put on the zippered top and attach the handle. The handle is going to be the really clever part, although I have only designed it in my head so far.

Bike bag template finished

Wow, that bike bag is HUGE.

First, I got all balled up at the corners because I was fitting half moon pieces into straight pieces. Not my usual "so tidy on the inside" at all. When I turned the bag right-side-out however, it looked fine so I guess I can live with it.

Next, I saw that the straps or loops were too small to put buttons on so I went for some left-over snaps I had. I think I may go for snaps in the finished product also. Then I stuffed the bag FULL of every hand towel I own (it is very capacious) and went to the garage.

As I planned, I slid one fixed loop over one end of the handlebars and then slid it to the middle to get the other loop over the end of the bar. That went well.

Then I centered it and snapped the middle loops shut and there it was - the biggest handlebar bag I've ever seen. I think it will connect with my knees as I pedal but I won't know for sure until we go for a ride or at least until Peter holds the bike for me while I sit on it. It sure didn't seem very big with the dimensions I wrote down, nor while I was making it. So I am glad I made this template and will go back to the drawing board after a test drive.

Brief bike interlude

So there I was, sewing away on the black 3/4 sleeve unlined jacket and thinking that black is sure hard to photograph, when it occurred to me that I needed to make a handlebar bag for the tandem. First, where I have got to on the jacket.

The instructions call for all four front pieces (two fronts, to facings) to be interfaced. All I had in black was sew-in interfacing but I thought it would be best to use that in any event, as the iron-on stuff still seems to bubble and I am not convinced it is the best choice for large pieces like these. Plus, I am going to use it (sew-in) for the navy wool (whenever I get to it) and it's good to practise.

I'm sewing all the vertical seams and flat felling them in the modified fell, mostly because the jacket is only partly lined. Even though it is cotton, this fabric doesn't take a crease very well, and it frays and sheds, so the flat felling has been awkward. Here, you can see two seams, one unfinished at the top and the other is the seam between the interfacing front piece and the front side piece. I had to resort to pinning the curves after I ironed the seam allowances. Anyway, it is coming along but first, the bike bag.

I made a sketch of what I wanted and filled in dimensions after going into the garage to measure distances between handlebar ends, stems and water bottle cages. I figure I can slip the sewn-in loops over the ends of the handlebar (first one side and then the other) and then secure the middle tabs or loops once the bag was hanging from the bar. A zipper the entire width of the bag would allow easy access.

The bag is effectively a muslin because I'm going to have to use it on a ride to determine what changes might have to be made. I'm also going to have internal pockets and an external zipped pocket on the finished model. Here are the top and bottom of the bag. You can see I have split the top and added seam allowances in order to allow a zipper along the front (close to me the rider) edge.

Here are the top and bottom again, without the zipper yet. The bottom (I left the white selvage on it) is folded back on itself.

After I installed the zipper, I cut a piece for the curved back and without thinking, sewed it on to the top. I was so concerned about how I was going to fit a curved piece onto a flat piece that I totally forgot I wanted to sew in the four tabs that are needed to secure the bag to the bar. Stupid. Now I have to pick the seam apart in four places and insert the tabs. Grr.