Reversible jacket finished

My pink reversible jacket is done!

I am especially pleased with how comfortable it is. It is soft and cozy and unrestricting. I decided in the end to sew on large snaps as fasteners. I had thought of using the hammer-on snaps, knowing they would show on the outside of the garment but when it occurred to me that I could sew them on inside the fronts, I realized they would not show on the outside and so make the reversibility even less obvious. I had some 11 mm snaps but went out and got the biggest sew-on snaps they had - the 15 mm variety.

Going back to where I left off, I did a flat fell of the entire underarm seam (as usual). This jacket has to look as good on the blue side as the pink side. The fabric is a little bulky, being double-sided, but it isn't as stiff as 10 ounce denim so it wasn't that difficult.

It's always fun to sew down into the tube of the sleeve and come out at the far end of the sleeve. I put this photo in for a friend in my writers group who sewed his own shirt recently and wondered how flat felling this seam worked.

I made a sort of "couture" hem on the back (and then the sleeves). I used a single layer of the pink fabric that I got from the selvages and folded it over the raw edge of the hem. This photo is at the back where the side seams meet and the front bands end. On the right, everything is unfolded and on the left, I have started to pin everything down for top stitching.

Here are the cuffs, before and during hemming. Another friend said I should make turned-up cuffs in the contrasting colour, even though I made a point of really limiting the amount of contrast elsewhere on the jacket. I thought she was right.

Here's the jacket, almost finished (I haven't sewed the snaps on yet) with the cuffs turned up. Now that I have been nominated the next president of the board at BCA, it will be nice to have another bright pink jacket to wear for certain occasions. Breast cancer has surely appropriated the colour pink and it will serve to promote our charity.